Grant details
- FCC ID
- SQG-SU60SOMC
- Grantee
- Ezurio LLC
- Grantee code
- SQGWhat is this?
- Product code
- SU60SOMCWhat is this?
- Product name
- 802.11ac Professional Wi-Fi + BT5.0 Module
- Equipment class
- NII · Unlicensed National Information Infrastructure TX The equipment class is the FCC’s code for the type of transmitter or device, such as DTS for digital transmission systems (most Wi-Fi and Bluetooth Low Energy devices). It decides which technical rules the device was tested against. More in the glossary
- Grant date
- 2026-05-18
- Application purpose
- Class II Permissive Change A Class II Permissive Change is a change to a certified device that affects characteristics reported in the original application. The grantee files new test data, and the FCC ID stays the same. Read the guide
- Product category
- Bluetooth and WiFi How categories work
- Frequency range
-
5180-5240 MHz5260-5340 MHz5500-5720 MHz5745-5825 MHz2402-2480 MHz2412-2462 MHz
- Address
- Cedarburg, WI, 53012, United States
- Application ID
- PFt3iqNRMc+PaTeYdjMnfw==
- Documents
What this grant means
On 2026-05-18 the FCC issued an equipment authorization grant to Ezurio LLC for FCC ID SQG-SU60SOMC. A Class II Permissive Change means the grantee changed a device already certified under this FCC ID in a way that affects characteristics reported in the original application. New test data was filed and the FCC ID stays the same.
Equipment authorization
| Frequency (MHz) | Output power | Tolerance | Emission designator | Rules |
|---|---|---|---|---|
| 5180–5240 | 0.123 | 15E | ||
| 5260–5340 | 0.08 | 15E | ||
| 5500–5720 | 0.113 | 15E | ||
| 5745–5825 | 0.109 | 15E |
Application information
- Responsible party
- Brian Petted, brian.petted@lairdconnect.com, 2624214974
- Non-technical contact
- Brian Petted, Ezurio LLC, brian.petted@ezurio.com, 262-421-4974
- Test firm
- Adam Alger, Ezurio, Adam.Alger@ezurio.com, 262 375 4248
- TCB email
- US-certification@cetecom.com
- TCB scope
- A4: UNII devices & low power transmitters using spread spectrum techniques
- Long-term confidentiality
- No
- Short-term confidentiality
- No
- Modular equipment
- Single Modular Approval
- Composite device
- Yes
- Cognitive radio
- No
- Authorization waiver
- No
- Authorization waiver approved
- No
- Section 5301 certification
- Yes
- Related OET Knowledge DataBase Inquiry
- No
Applications 6
- 2026-05-18 Class II Permissive Change PFt3iqNRMc+PaTeYdjMnfw==
- 2021-10-29 Class II Permissive Change 0VUtKf9CJEJsO4Vz1jD6uQ==
- 2020-05-04 Class II Permissive Change LS8/Uo4Q2IwpEaDHKaUevg==
- 2020-04-30 Class II Permissive Change 0CGc4WI3G+w/4o0dP1AJJQ==
- 2020-04-29 Class II Permissive Change wI822iqIabWrMTZhwb5njw==
- 2018-11-22 Original Equipment EoTXQoe6xlz5kVt2UAddKA==
Grant of authorization
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
CETECOM Inc. 411 Dixon Landing Road Milpitas, CA 95035 |
Date of Grant: 05/18/2026 |
| Ezurio LLC |
| W66N220 Commerce Court |
| Cedarburg, WI 53012 |
| Attention: Brian Petted , Technology Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SQG-SU60SOMC |
| Name of Grantee: | Ezurio LLC |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11ac Professional Wi-Fi + BT5.0 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.123 | ||
| CC MO ND | 15E | 5260.0 - 5340.0 | 0.08 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.113 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.109 |
| Class II Permissive Change : Adding antennas as described in this filing Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
Documents 8
View on fcc.gov ↗ (opens in a new tab)FCC.gov blocks direct links from other sites (referer check), so the titles below are not clickable. Use “View on fcc.gov” above to open and download the actual files.
-
Attestation letter 2.911(D)(5)&(7)Attestation Statements · Available 2026-05-18 · PDF 341.7 KB
-
cover letterCover Letter(s) · Available 2026-05-18 · PDF 303.4 KB
-
External PhotosExternal Photos · Available 2026-05-18 · PDF 366.8 KB
-
RF Exposure reportRF Exposure Info · Available 2026-05-18 · PDF 723.4 KB
-
Test ReportTest Report · Available 2026-05-18 · PDF 3.8 MB
-
antenna informationTest Report · Available 2026-05-18 · PDF 883.8 KB
-
Test setup photosTest Setup Photos · Available 2026-05-18 · PDF 514.6 KB
-
ManualUsers Manual · Available 2026-05-18 · PDF 293.1 KB