Grant details
- FCC ID
- SQG-SU60SOMC
- Grantee
- Ezurio LLC
- Grantee code
- SQGWhat is this?
- Product code
- SU60SOMCWhat is this?
- Product name
- 802.11ac Professional Wi-Fi + BT5.0 Module
- Equipment class
- DSS · Part 15 Spread Spectrum Transmitter The equipment class is the FCC’s code for the type of transmitter or device, such as DTS for digital transmission systems (most Wi-Fi and Bluetooth Low Energy devices). It decides which technical rules the device was tested against. More in the glossary
- Grant date
- 2020-04-30
- Application purpose
- Class II Permissive Change A Class II Permissive Change is a change to a certified device that affects characteristics reported in the original application. The grantee files new test data, and the FCC ID stays the same. Read the guide
- Product category
- Bluetooth and WiFi How categories work
- Frequency range
-
2402-2480 MHz2412-2462 MHz5180-5240 MHz5260-5320 MHz5500-5720 MHz5745-5825 MHz
- Address
- Cedarburg, WI, 53012, United States
- Application ID
- 0CGc4WI3G+w/4o0dP1AJJQ==
- Documents
What this grant means
On 2020-04-30 the FCC issued an equipment authorization grant to Ezurio LLC for FCC ID SQG-SU60SOMC. A Class II Permissive Change means the grantee changed a device already certified under this FCC ID in a way that affects characteristics reported in the original application. New test data was filed and the FCC ID stays the same.
Equipment authorization
| Frequency (MHz) | Output power | Tolerance | Emission designator | Rules |
|---|---|---|---|---|
| 2402–2480 | 0.012 | 15C |
Application information
- Responsible party
- Brian Petted, brian.petted@lairdconnect.com, 2624214974
- Technical contact
- Gary Chang, International Certification Corp., GaryChang@icertifi.com.tw, 886-3-271-8628
- Non-technical contact
- Wendy Liao, International Certification Corp., wendyLiao@icertifi.com.tw, 886-3-271-8629
- Test firm
- Fu-Cheng Chuang, International Certification Corp., Jeff@icertifi.com.tw, 886-3-318-0155
- TCB email
- certification@telefication.com
- TCB scope
- A4: UNII devices & low power transmitters using spread spectrum techniques
- Long-term confidentiality
- No
- Short-term confidentiality
- No
- Modular equipment
- Single Modular Approval
- Composite device
- Yes
- Cognitive radio
- No
- Authorization waiver
- No
- Authorization waiver approved
- No
- Section 5301 certification
- Yes
- Related OET Knowledge DataBase Inquiry
- No
Applications 6
- 2026-05-18 Class II Permissive Change PFt3iqNRMc+PaTeYdjMnfw==
- 2021-10-29 Class II Permissive Change 0VUtKf9CJEJsO4Vz1jD6uQ==
- 2020-05-04 Class II Permissive Change LS8/Uo4Q2IwpEaDHKaUevg==
- 2020-04-30 Class II Permissive Change 0CGc4WI3G+w/4o0dP1AJJQ==
- 2020-04-29 Class II Permissive Change wI822iqIabWrMTZhwb5njw==
- 2018-11-22 Original Equipment EoTXQoe6xlz5kVt2UAddKA==
Grant of authorization
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 04/30/2020 |
| Ezurio LLC |
| W66N220 Commerce Court |
| Cedarburg, WI 53012 |
| Attention: Brian Petted , Technology Leader |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | SQG-SU60SOMC |
| Name of Grantee: | Ezurio LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11ac Professional Wi-Fi + BT5.0 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.012 |
| This Class II Permissive Change incorporates previously certified module into the host (mobile category configuration, Host Model: Sentrius IG60-SERIAL-LTE, Product Name: Sentrius IG60 Serial, Wi-Fi, & LTE Cat 1 Gateway). Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
Documents 12
View on fcc.gov ↗ (opens in a new tab)FCC.gov blocks direct links from other sites (referer check), so the titles below are not clickable. Use “View on fcc.gov” above to open and download the actual files.
-
MPE RevisedRF Exposure Info · Available 2020-04-30 · PDF 258.3 KB
-
Test Report_co-location RevisedTest Report · Available 2020-04-30 · PDF 1.1 MB
-
External Photos_revised0520External Photos · Available 2020-04-30 · PDF 2 MB
-
External Photos RevisedMetadata onlyExternal Photos · Available 2020-04-30 · PDF 2 MB
-
POACover Letter(s) · Available 2020-04-30 · PDF 141.4 KB
-
C2PC cover letterCover Letter(s) · Available 2020-04-30 · PDF 124.2 KB
-
External photoMetadata onlyExternal Photos · Available 2020-04-30 · PDF 2 MB
-
ID Label/Location InfoID Label/Location Info · Available 2020-04-30 · PDF 236.2 KB
-
Internal photoInternal Photos · Available 2020-04-30 · PDF 2.1 MB
-
MPEMetadata onlyRF Exposure Info · Available 2020-04-30 · PDF 256.6 KB
-
Test Setup PhotosTest Setup Photos · Available 2020-04-30 · PDF 754.7 KB
-
User manualUsers Manual · Available 2020-04-30 · PDF 806.5 KB