Provided by 360 Compliance

FCC IDSQG-SU60SOMC

Granted to Ezurio LLC on 2020-05-04

Class II Permissive Change

Grant details

FCC ID
SQG-SU60SOMC
Grantee
Ezurio LLC
Grantee code
SQGWhat is this?
Product code
SU60SOMCWhat is this?
Product name
802.11ac Professional Wi-Fi + BT5.0 Module
Equipment class
DTS · Digital Transmission System
Grant date
2020-05-04
Application purpose
Class II Permissive Change
Product category
Bluetooth and WiFi How categories work
Frequency range
2402-2480 MHz2412-2462 MHz5180-5240 MHz5260-5320 MHz5500-5720 MHz5745-5825 MHz
Address
Cedarburg, WI, 53012, United States
Application ID
LS8/Uo4Q2IwpEaDHKaUevg==
Documents

What this grant means

On 2020-05-04 the FCC issued an equipment authorization grant to Ezurio LLC for FCC ID SQG-SU60SOMC. A Class II Permissive Change means the grantee changed a device already certified under this FCC ID in a way that affects characteristics reported in the original application. New test data was filed and the FCC ID stays the same.

SQGGrantee code, assigned by the FCC
SU60SOMCProduct code, chosen by the grantee

Equipment authorization

Frequency (MHz)Output powerToleranceEmission designatorRules
2412–2462 0.773 15C
2402–2480 0.009 15C

Application information

Responsible party
Brian Petted, brian.petted@lairdconnect.com, 2624214974
Technical contact
Gary Chang, International Certification Corp., GaryChang@icertifi.com.tw, 886-3-271-8628
Non-technical contact
Wendy Liao, International Certification Corp., wendyLiao@icertifi.com.tw, 886-3-271-8629
Test firm
Fu-Cheng Chuang, International Certification Corp., Jeff@icertifi.com.tw, 886-3-318-0155
TCB email
certification@telefication.com
TCB scope
A4: UNII devices & low power transmitters using spread spectrum techniques
Long-term confidentiality
No
Short-term confidentiality
No
Modular equipment
Single Modular Approval
Composite device
Yes
Cognitive radio
No
Authorization waiver
No
Authorization waiver approved
No
Section 5301 certification
Yes
Related OET Knowledge DataBase Inquiry
No

Applications 6

  • 2026-05-18 Class II Permissive Change PFt3iqNRMc+PaTeYdjMnfw==
  • 2021-10-29 Class II Permissive Change 0VUtKf9CJEJsO4Vz1jD6uQ==
  • 2020-05-04 Class II Permissive Change LS8/Uo4Q2IwpEaDHKaUevg==
  • 2020-04-30 Class II Permissive Change 0CGc4WI3G+w/4o0dP1AJJQ==
  • 2020-04-29 Class II Permissive Change wI822iqIabWrMTZhwb5njw==
  • 2018-11-22 Original Equipment EoTXQoe6xlz5kVt2UAddKA==

Grant of authorization

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:
  Kiwa Nederland B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 05/04/2020

Application Dated: 05/04/2020
Ezurio LLC
W66N220 Commerce Court
Cedarburg, WI 53012
 
Attention: Brian Petted , Technology Leader
NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SQG-SU60SOMC
Name of Grantee:  Ezurio LLC
Equipment Class: Digital Transmission System
Notes: 802.11ac Professional Wi-Fi + BT5.0 Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.773  
CC 15C 2402.0  -  2480.0 0.009  
This Class II Permissive Change incorporates previously certified module into the host (mobile category configuration, Host Model: Sentrius IG60-BL654-LTE, Product Name: Sentrius IG60 Bluetooth 5, Wi-Fi & LTE Cat 1 Gateway). Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Documents 10

View on fcc.gov ↗ (opens in a new tab)

FCC.gov blocks direct links from other sites (referer check), so the titles below are not clickable. Use “View on fcc.gov” above to open and download the actual files.

  • RF Exposure Info_revised0526
    RF Exposure Info · Available 2020-05-04 · PDF 262.1 KB
  • Test Report_co-location_revised0526
    Test Report · Available 2020-05-04 · PDF 841.1 KB
  • POA
    Cover Letter(s) · Available 2020-05-04 · PDF 141.3 KB
  • Class II permissive change letter
    Cover Letter(s) · Available 2020-05-04 · PDF 124.1 KB
  • External Photos
    External Photos · Available 2020-05-04 · PDF 2 MB
  • ID Label/Location Info
    ID Label/Location Info · Available 2020-05-04 · PDF 256.4 KB
  • Internal Photos
    Internal Photos · Available 2020-05-04 · PDF 2.2 MB
  • RF Exposure InfoMetadata only
    RF Exposure Info · Available 2020-05-04 · PDF 260.6 KB
  • Test Setup Photos
    Test Setup Photos · Available 2020-05-04 · PDF 761.6 KB
  • Users Manual
    Users Manual · Available 2020-05-04 · PDF 806.5 KB

360Compliance

Need help with FCC certification or global market access?