Grant details
- FCC ID
- PKRNVWFB2C
- Grantee
- Inseego Corp.
- Grantee code
- PKRNVWhat is this?
- Product code
- WFB2CWhat is this?
- Product name
- PCS CDMA MODEM
- Equipment class
- PCB · PCS Licensed Transmitter The equipment class is the FCC’s code for the type of transmitter or device, such as DTS for digital transmission systems (most Wi-Fi and Bluetooth Low Energy devices). It decides which technical rules the device was tested against. More in the glossary
- Grant date
- 2003-12-08
- Application purpose
- Original Equipment Original Equipment is the first FCC authorization for a device. The grantee filed a full application with test reports, and the device received a new FCC ID. Read the guide
- Product category
- Wireless How categories work
- Frequency range
-
1851.25-1908.75 MHz
- Address
- 9710 Scranton Road Suite 200, San Diego, CA, 92121, United States
- Application ID
- qtVkE9gSd/n79SoR8WqKRg==
- Documents
What this grant means
On 2003-12-08 the FCC issued an equipment authorization grant to Inseego Corp. for FCC ID PKRNVWFB2C. Original Equipment means this is the first authorization for this device, not a change to an earlier one.
PKRNVGrantee code, assigned by the FCC
WFB2CProduct code, chosen by the grantee
Equipment authorization
| Frequency (MHz) | Output power | Tolerance | Emission designator | Rules |
|---|---|---|---|---|
| 1851.25–1908.75 | 0.25 | 1.0000000000 ppm | 1M25F9W | 24E |
Application information
- Responsible party
- Roman Olmos, roman.olmos@inseego.com, 858-812-3400
- Test firm
- Morton Flom, M. Flom Associates, Inc., info@mflom.com, 480-926-3598
- TCB email
- TEI@TIMCOENGR.COM
- TCB scope
- B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
- Long-term confidentiality
- Yes
- Short-term confidentiality
- No
- Modular equipment
- Does not apply
- Composite device
- No
- Cognitive radio
- No
- Authorization waiver
- No
- Authorization waiver approved
- No
- Section 5301 certification
- Yes
- Related OET Knowledge DataBase Inquiry
- No
Grant of authorization
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
IIA Lab Services, LLC 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 12/08/2003 |
| Inseego Corp. |
| 9710 Scranton Road |
| Suite 200 |
| San Diego, CA 92121 |
| Attention: Roman Olmos , Sr. Staff Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PKRNVWFB2C |
| Name of Grantee: | Inseego Corp. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | PCS CDMA MODEM |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BD | 24E | 1851.25 - 1908.75 | 0.25 | 1.0 PM | 1M25F9W |
| Power listed is conducted. Mobile operation conditions: The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Fixed operation conditions: The antenna used for this transmitter(s) must be fixed-mounted on outdoor permanent structures. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| BD: | The output power is continuously variable from the value listed in this entry to 10%-15% of the value listed. |
Documents 15
View on fcc.gov ↗ (opens in a new tab)FCC.gov blocks direct links from other sites (referer check), so the titles below are not clickable. Use “View on fcc.gov” above to open and download the actual files.
-
BLOCK DIAGRAMMetadata onlyBlock Diagram · PDF 21.2 KB
-
REQUEST FOR CONFIDENTIALITYCover Letter(s) · Available 2003-12-08 · PDF 133.9 KB
-
EXTERNAL PHOTOSExternal Photos · Available 2003-12-08 · PDF 500.7 KB
-
ID LABEL SAMPLEID Label/Location Info · Available 2003-12-08 · PDF 36.2 KB
-
ID LABEL LOCATIONID Label/Location Info · Available 2003-12-08 · PDF 4.5 KB
-
INTERNAL PHOTOSInternal Photos · Available 2003-12-08 · PDF 647.4 KB
-
THEORY OF OPERATIONMetadata onlyOperational Description · PDF 47.3 KB
-
ACTIVE DEVICES PARTS LISTMetadata onlyParts List/Tune Up Info · PDF 8 KB
-
PARTS LISTMetadata onlyParts List/Tune Up Info · PDF 11 KB
-
TUNE UP PROCEDUREMetadata onlyParts List/Tune Up Info · PDF 56.6 KB
-
FREEDOM BOX SPEC SHEETMetadata onlyParts List/Tune Up Info · PDF 86.3 KB
-
FCC MPERF Exposure Info · Available 2003-12-08 · PDF 536 KB
-
SCHEMATICSMetadata onlySchematics · PDF 617.5 KB
-
FCC CERTIFICATIONTest Report · Available 2003-12-08 · PDF 1.1 MB
-
USERS MANUALUsers Manual · Available 2003-12-08 · PDF 557.2 KB
Block diagram, schematics and operational description are held confidential at the applicant’s request, so the FCC does not publish them. Why are some documents confidential?