Grant details
- FCC ID
- PKRNVWES720
- Grantee
- Inseego Corp.
- Grantee code
- PKRNVWhat is this?
- Product code
- WES720What is this?
- Product name
- Dual-Band CDMA / EvDO Module
- Equipment class
- PCB · PCS Licensed Transmitter The equipment class is the FCC’s code for the type of transmitter or device, such as DTS for digital transmission systems (most Wi-Fi and Bluetooth Low Energy devices). It decides which technical rules the device was tested against. More in the glossary
- Grant date
- 2006-09-22
- Application purpose
- Class II Permissive Change A Class II Permissive Change is a change to a certified device that affects characteristics reported in the original application. The grantee files new test data, and the FCC ID stays the same. Read the guide
- Product category
- Wireless How categories work
- Frequency range
-
824.7-848.31 MHz1851.25-1908.75 MHz
- Address
- 9710 Scranton Road Suite 200, San Diego, CA, 92121, United States
- Application ID
- VWDtNYnFLE4wo3J6gawkbg==
- Documents
What this grant means
On 2006-09-22 the FCC issued an equipment authorization grant to Inseego Corp. for FCC ID PKRNVWES720. A Class II Permissive Change means the grantee changed a device already certified under this FCC ID in a way that affects characteristics reported in the original application. New test data was filed and the FCC ID stays the same.
Equipment authorization
| Frequency (MHz) | Output power | Tolerance | Emission designator | Rules |
|---|---|---|---|---|
| 824.7–848.31 | 0.295 | 2.5 ppm | 1M28F9W | 22H |
| 1851.25–1908.75 | 0.282 | 2.5 ppm | 1M28F9W | 24E |
Application information
- Responsible party
- Roman Olmos, roman.olmos@inseego.com, 858-812-3400
- Technical contact
- Randy Ortanez, PCTEST Engineering Laboratory, Inc., randy@pctestlab.com, 410-290-6652
- Test firm
- Randy Ortanez, PCTEST Engineering Laboratory, Inc., randy@pctestlab.com, 4102906654
- TCB email
- randy@pctestlab.com
- TCB scope
- B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
- Long-term confidentiality
- No
- Short-term confidentiality
- No
- Modular equipment
- Single Modular Approval
- Composite device
- No
- Cognitive radio
- No
- Authorization waiver
- No
- Authorization waiver approved
- No
- Section 5301 certification
- Yes
- Related OET Knowledge DataBase Inquiry
- No
Applications 2
- 2006-09-22 Class II Permissive Change VWDtNYnFLE4wo3J6gawkbg==
- 2006-08-07 Original Equipment f4IpgyT7i/CImW0NCZ9ipw==
Grant of authorization
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Element Materials Technology Washington DC LLC (formerly PCTEST) 7185 Oakland Mills Road Columbia, MD 21046 |
Date of Grant: 09/22/2006 |
| Inseego Corp. |
| 9710 Scranton Road |
| Suite 200 |
| San Diego, CA 92121 |
| Attention: Roman Olmos , Sr. Staff Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PKRNVWES720 |
| Name of Grantee: | Inseego Corp. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Dual-Band CDMA / EvDO Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.295 | 2.5 PM | 1M28F9W | |
| 24E | 1851.25 - 1908.75 | 0.282 | 2.5 PM | 1M28F9W |
| Class II Permissive Change. Modular approval. Power listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The maximum antenna gain is 3dBi. |
Documents 3
View on fcc.gov ↗ (opens in a new tab)FCC.gov blocks direct links from other sites (referer check), so the titles below are not clickable. Use “View on fcc.gov” above to open and download the actual files.
-
Cover LetterCover Letter(s) · Available 2006-09-22 · PDF 9.1 KB
-
Test ReportTest Report · Available 2006-09-22 · PDF 433.4 KB
-
Test Setup PhotosTest Setup Photos · Available 2006-09-22 · PDF 831 KB