Provided by 360 Compliance

FCC IDMSQBE200NG

Granted to ASUSTeK COMPUTER INC. on 2026-09-24

Change in Identification

Grant details

FCC ID
MSQBE200NG
Grantee
ASUSTeK COMPUTER INC.
Grantee code
MSQBEWhat is this?
Product code
200NGWhat is this?
Product name
Intel BE200
Equipment class
6VL · 15E 6 GHZ Very Low Power Device
Grant date
2026-09-24
Application purpose
Change in Identification
Product category
Bluetooth and WiFi How categories work
Frequency range
5955-7115 MHz5965-7085 MHz5985-7025 MHz6025-6985 MHz6105-6905 MHz
Address
Beitou, Taipei, 112, Taiwan
Application ID
3D994NBdnMoOM+sWWFpDpQ==
Documents

What this grant means

On 2026-09-24 the FCC issued an equipment authorization grant to ASUSTeK COMPUTER INC. for FCC ID MSQBE200NG. A Change in Identification means a device that was already certified is now authorized under this new FCC ID, without electrical changes.

MSQBEGrantee code, assigned by the FCC
200NGProduct code, chosen by the grantee

Equipment authorization

Frequency (MHz)Output powerToleranceEmission designatorRules
5955–7115 0.005 15E
5965–7085 0.01 15E
5985–7025 0.021 15E
6025–6985 0.024 15E
6105–6905 0.025 15E

Application information

Responsible party
Jackson Yen, jackson_yen@asus.com, +886-2-28943447
Technical contact
Vera Hsu, DEKRA Testing and Certification Co., Ltd., vera.hsu@dekra.com, 886 3-5828001
Non-technical contact
Gigi Liu, ASUS COMPUTER INTERNATIONAL, gigi_liu@asus.com, 5103999138
Test firm
Nawfal ASRIH, Intel Corporation S.A.S., nawfal.asrih@intel.com, 003349300962
TCB email
hotline@acbcert.com
TCB scope
A4: UNII devices & low power transmitters using spread spectrum techniques
Long-term confidentiality
No
Short-term confidentiality
No
Modular equipment
Single Modular Approval
Composite device
Yes
Cognitive radio
No
Authorization waiver
No
Authorization waiver approved
No
Section 5301 certification
Yes
Related OET Knowledge DataBase Inquiry
Yes

Applications 7

  • 2026-09-24 Change in Identification 3D994NBdnMoOM+sWWFpDpQ==
  • 2026-03-30 Class II Permissive Change pagNjPfEuXhpqSrYcMZwfg==
  • 2025-05-16 Class II Permissive Change MY7scwTwT1VYWPD3qkJCeg==
  • 2025-04-28 Class II Permissive Change /37AwBJORzbohmGTsbjaew==
  • 2025-02-21 Class II Permissive Change zP67AkWJ0/0GvKlI+/7JQQ==
  • 2025-02-20 Class II Permissive Change VvsDoR9MyjaM7FxnqTEnkg==
  • 2024-11-21 Change in Identification a3BqbxbSNu8DhCQ3jJTNpQ==

Grant of authorization

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:
  ACB, Inc.
3060 Williams Drive Suite 300 #104
Falls Church, VA 22031
Date of Grant: 09/24/2026

Application Dated: 09/15/2026
ASUSTeK COMPUTER INC.
1F, No. 15, Lide Rd.
Beitou, Taipei, 112
Taiwan
 
Attention: Jackson Yen , Associate Vice President
NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MSQBE200NG
Name of Grantee:  ASUSTeK COMPUTER INC.
Equipment Class: 15E 6 GHZ Very Low Power Device
Notes: Intel BE200
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO 15E 5955.0  -  7115.0 0.005  
CC EP MO 15E 5965.0  -  7085.0 0.01  
CC EP MO 15E 5985.0  -  7025.0 0.021  
CC EP MO 15E 6025.0  -  6985.0 0.024  
CC EP MO 15E 6105.0  -  6905.0 0.025  
Power Output listed is EIRP. Modular Approval Filing. This grant covers VLP mode and is not allowed to operate under the control of a Low-power indoor access point while in this mode of operation. Device is a 2x2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The host-product antenna must be permanently installed and not replaceable by the end user. Any attempt to replace or modify the antenna by the end user is strictly prohibited and will void the FCC certification.

This device supports 20, 40, 80, 160, and 320 MHz BW modes.

Power Density and SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna for each distance/SKU.

For full power SKU: The highest reported Body and Simultaneous SAR values are 0.62 W/kg and 1.58 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (4.88 to 5.02 dBi) at 45mm minimum test separation distance.

The additional SKU/power profiles determine conditions based on modular stand-alone SAR evaluation to establish the minimum antenna to user separation distances (5mm, 8mm and 11 mm) at a maximum SAR value less than 0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01.

SKU 5 mm: The highest reported Body and Simultaneous SAR values are: 0.78 W/kg and 1.57 W/kg respectively.

SKU 8 mm: The highest reported Body and Simultaneous SAR values are: 0.76 W/kg and 1.56 W/kg respectively.

SKU 11 mm: The highest reported Body and Simultaneous SAR values are: 0.74 W/kg and 1.57 W/kg respectively.

This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (4.88 to 5.02 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi.

CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Documents 8

View on fcc.gov ↗ (opens in a new tab)

FCC.gov blocks direct links from other sites (referer check), so the titles below are not clickable. Use “View on fcc.gov” above to open and download the actual files.

  • BE200NGW FCC U.S. Agent Designation Attestation Letter
    Attestation Statements · Available 2026-09-24 · PDF 139.3 KB
  • BE200NGW FCC_Covered_List_Attestation_Letter_2026.09.14
    Attestation Statements · Available 2026-09-24 · PDF 68.9 KB
  • BE200NGW Authorization letter by Intel_2026.09.14
    Cover Letter(s) · Available 2026-09-24 · PDF 157.9 KB
  • BE200NGW Declaration of authorization_FCC_2026.09.14
    Cover Letter(s) · Available 2026-09-24 · PDF 61 KB
  • BE200NGW FCC Declaration letter for electrically identical_2026.09.14
    Cover Letter(s) · Available 2026-09-24 · PDF 207.4 KB
  • BE200NGW Expho_2026.09.14
    External Photos · Available 2026-09-24 · PDF 494.9 KB
  • BE200NGW LabelLoc_2026.09.14
    ID Label/Location Info · Available 2026-09-24 · PDF 365 KB
  • BE200NGW LabelSmpl
    ID Label/Location Info · Available 2026-09-24 · PDF 70 KB

360Compliance

Need help with FCC certification or global market access?