Intel BE200 — by ASUSTeK COMPUTER INC.
FCC.gov blocks direct links from other sites (referer check) — titles below aren't clickable.
Use "View on FCC.gov" above to open and download the actual files.
This device supports 20, 40, 80, 160, and 320 MHz BW modes. Power Density and SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna for each distance/SKU. For full power SKU: The highest reported Body and Simultaneous SAR values are 0.62 W/kg and 1.58 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (4.88 to 5.02 dBi) at 45mm minimum test separation distance. The additional SKU/power profiles determine conditions based on modular stand-alone SAR evaluation to establish the minimum antenna to user separation distances (5mm, 8mm and 11 mm) at a maximum SAR value less than 0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. SKU 5 mm: The highest reported Body and Simultaneous SAR values are: 0.78 W/kg and 1.57 W/kg respectively. SKU 8 mm: The highest reported Body and Simultaneous SAR values are: 0.76 W/kg and 1.56 W/kg respectively. SKU 11 mm: The highest reported Body and Simultaneous SAR values are: 0.74 W/kg and 1.57 W/kg respectively. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (4.88 to 5.02 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi.
FCC ID MSQBE200NG
Device Details
FCC ID MSQBE200NG Grantee Code MSQBE Product Code 200NG Applicant ASUSTeK COMPUTER INC. Address Beitou, Taipei, N/A, 112, Taiwan Equipment Class 6VL - 15E 6 GHZ Very Low Power Device Device Description Intel BE200 Application Purpose Change in Identification Grant Date 2026-09-24 Frequency Range 5955-7115 MHz; 5965-7085 MHz; 5985-7025 MHz; 6025-6985 MHz; 6105-6905 MHz Operating Frequencies
Frequency Range Application Purpose Final Action Date
5955–7115 MHz
Change in Identification
2026-09-24
5965–7085 MHz
Change in Identification
2026-09-24
5985–7025 MHz
Change in Identification
2026-09-24
6025–6985 MHz
Change in Identification
2026-09-24
6105–6905 MHz
Change in Identification
2026-09-24
Exhibits (8)
View on FCC.gov ↗
Document Type Available File
BE200NGW FCC U.S. Agent Designation Attestation Letter
Attestation Statements
2026-09-24
ADOBE ACROBAT PDF 139.3 KB
BE200NGW FCC_Covered_List_Attestation_Letter_2026.09.14
Attestation Statements
2026-09-24
ADOBE ACROBAT PDF 68.9 KB
BE200NGW Authorization letter by Intel_2026.09.14
Cover Letter(s)
2026-09-24
ADOBE ACROBAT PDF 157.9 KB
BE200NGW Declaration of authorization_FCC_2026.09.14
Cover Letter(s)
2026-09-24
ADOBE ACROBAT PDF 61 KB
BE200NGW FCC Declaration letter for electrically identical_2026.09.14
Cover Letter(s)
2026-09-24
ADOBE ACROBAT PDF 207.4 KB
BE200NGW Expho_2026.09.14
External Photos
2026-09-24
ADOBE ACROBAT PDF 494.9 KB
BE200NGW LabelLoc_2026.09.14
ID Label/Location Info
2026-09-24
ADOBE ACROBAT PDF 365 KB
BE200NGW LabelSmpl
ID Label/Location Info
2026-09-24
ADOBE ACROBAT PDF 70 KB
Application Information
Application ID 3D994NBdnMoOM+sWWFpDpQ== Final Action Date 2026-09-24 Application Purpose Change in Identification Model 200NG Frequency Range 5955-7115 MHz; 5965-7085 MHz; 5985-7025 MHz; 6025-6985 MHz; 6105-6905 MHz Equipment Class 6VL - 15E 6 GHZ Very Low Power Device Device Description Intel BE200 Responsible Party Jackson Yen, jackson_yen@asus.com, +886-2-28943447 Technical Contact Vera Hsu, DEKRA Testing and Certification Co., Ltd., vera.hsu@dekra.com, 886 3-5828001 Non-Technical Contact Gigi Liu, ASUS COMPUTER INTERNATIONAL, gigi_liu@asus.com, 5103999138 Test Firm Nawfal ASRIH, Intel Corporation S.A.S., nawfal.asrih@intel.com, 003349300962 TCB Email hotline@acbcert.com TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques Long-Term Confidentiality No Short-Term Confidentiality No Modular Equipment Single Modular Approval Composite Device Yes Cognitive Radio No Authorization Waiver No Authorization Waiver Approved No Section 5301 Certification Yes Related OET Knowledge DataBase Inquiry Yes Applications (7)
Application ID Date Purpose
3D994NBdnMoOM+sWWFpDpQ==
2026-09-24
Change in Identification
pagNjPfEuXhpqSrYcMZwfg==
2026-03-30
Class II Permissive Change
MY7scwTwT1VYWPD3qkJCeg==
2025-05-16
Class II Permissive Change
/37AwBJORzbohmGTsbjaew==
2025-04-28
Class II Permissive Change
zP67AkWJ0/0GvKlI+/7JQQ==
2025-02-21
Class II Permissive Change
VvsDoR9MyjaM7FxnqTEnkg==
2025-02-20
Class II Permissive Change
a3BqbxbSNu8DhCQ3jJTNpQ==
2024-11-21
Change in Identification
Equipment Authorization
Frequency Output Tolerance Emission Designator Rules
5955–7115 MHz
0.005
15E
5965–7085 MHz
0.01
15E
5985–7025 MHz
0.021
15E
6025–6985 MHz
0.024
15E
6105–6905 MHz
0.025
15E
Grants
TCB
GRANT OF EQUIPMENT
AUTHORIZATIONTCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:
ACB, Inc.
3060 Williams Drive Suite 300 #104
Falls Church, VA 22031
Date of Grant: 09/24/2026
ASUSTeK COMPUTER INC.
1F, No. 15, Lide Rd.
Beitou, Taipei, 112
Taiwan
Attention: Jackson Yen , Associate Vice President
NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
FCC IDENTIFIER:
MSQBE200NG
Name of Grantee:
ASUSTeK COMPUTER INC.
Equipment Class:
15E 6 GHZ Very Low Power Device
Notes:
Intel BE200
Modular Type:
Single Modular
Grant Notes
FCC Rule Parts
Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO
15E
5955.0
-
7115.0
0.005
CC EP MO
15E
5965.0
-
7085.0
0.01
CC EP MO
15E
5985.0
-
7025.0
0.021
CC EP MO
15E
6025.0
-
6985.0
0.024
CC EP MO
15E
6105.0
-
6905.0
0.025
Power Output listed is EIRP. Modular Approval Filing. This grant covers VLP mode and is not allowed to operate under the control of a Low-power indoor access point while in this mode of operation. Device is a 2x2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The host-product antenna must be permanently installed and not replaceable by the end user. Any attempt to replace or modify the antenna by the end user is strictly prohibited and will void the FCC certification.
CC:
This device is certified pursuant to two different Part 15 rules sections.
EP:
Output power is Effective Isotropic Radiated Power (EIRP)
MO:
This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
Regulatory Testing from Start to Certificate
