Qualcomm WiFi 7/BT Combo module — by Qualcomm Technologies, Inc.
FCC.gov blocks direct links from other sites (referer check) — titles below aren't clickable.
Use "View on FCC.gov" above to open and download the actual files.
CIIPC for this application. This change establishes portable category SAR conditions. The test separation distance is 8mm. The PIFA antenna Brand: HONGBO / Model: 260-25094 & 260-25083 highest reported Body and Simultaneous SAR values are 0.77 W/kg and 1.55 W/kg, respectively. The Monopole antenna Brand: HONGBO / Model: 260-25084 highest reported Body and Simultaneous SAR values are 0.75 W/kg and 1.55 W/kg, respectively. The test separation distance is 15mm. The PIFA antenna Brand: HONGBO / Model: 260-25094 & 260-25083 highest reported Body and Simultaneous SAR values are 0.76 W/kg and 1.36 W/kg, respectively. The Monopole antenna Brand: HONGBO / Model: 260-25084 highest reported Body and Simultaneous SAR values are 0.73 W/kg and 1.52 W/kg, respectively. Class II Permissive Change to adding U-NII-4 and U-NII -3 & -4 span channels through software enable. Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combined conducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes.
FCC ID J9C-QCNCM825
Device Details
FCC ID J9C-QCNCM825 Grantee Code J9C Product Code QCNCM825 Applicant Qualcomm Technologies, Inc. Address San Diego, CA, 92121, United States Equipment Class NII - Unlicensed National Information Infrastructure TX Device Description Qualcomm WiFi 7/BT Combo module Application Purpose Class II Permissive Change Grant Date 2026-03-02 Frequency Range 5180-5250 MHz; 5250-5320 MHz; 5500-5720 MHz; 5745-5825 MHz; 5815-5815 MHz; 5835-5835 MHz; 5845-5845 MHz; 5855-5855 MHz; 5865-5885 MHz; 2402-2480 MHz; 2404-2478 MHz; 5935-6415 MHz; 5935-7115 MHz; 6535-6855 MHz; 2412-2472 MHz Operating Frequencies
Frequency Range Application Purpose Final Action Date
5180–5250 MHz
Class II Permissive Change
2026-03-02
5250–5320 MHz
Class II Permissive Change
2026-03-02
5500–5720 MHz
Class II Permissive Change
2026-03-02
5745–5825 MHz
Class II Permissive Change
2026-03-02
5865–5885 MHz
Class II Permissive Change
2026-03-02
5845–5845 MHz
Class II Permissive Change
2026-03-02
5835–5835 MHz
Class II Permissive Change
2026-03-02
5855–5855 MHz
Class II Permissive Change
2026-03-02
5815–5815 MHz
Class II Permissive Change
2026-03-02
Exhibits (24)
View on FCC.gov ↗
Document Type Available File
J9C_Attestation_U.S. agent_2.911d7
Attestation Statements
2026-03-02
ADOBE ACROBAT PDF 112.8 KB
J9C-QCNCM825_Attestation_Covered List_2.911d5(i)
Attestation Statements
2026-03-02
ADOBE ACROBAT PDF 142.5 KB
J9C-QCNCM825_Attestation_Covered List_2.911d5(ii)
Attestation Statements
2026-03-02
ADOBE ACROBAT PDF 142.5 KB
J9C-QCNCM825_cvrltr_Class II Permissive Change
Cover Letter(s)
2026-03-02
ADOBE ACROBAT PDF 89.2 KB
J9C-QCNCM825_cvrltr_FCC Confidentiality Request
Cover Letter(s)
2026-03-02
ADOBE ACROBAT PDF 123.4 KB
J9C-QCNCM825_cvrltr_FCC POA
Cover Letter(s)
2026-03-02
ADOBE ACROBAT PDF 118 KB
J9C-QCNCM825_FCC LOA
Cover Letter(s)
2026-03-02
ADOBE ACROBAT PDF 90.4 KB
extpho_FCC
External Photos
2026-08-29
ADOBE ACROBAT PDF 2.4 MB
IdeaPad Slim 5 15Q8Y11-Label-QCNCM825
ID Label/Location Info
2026-03-02
ADOBE ACROBAT PDF 112.7 KB
Intpho_FCC
Internal Photos
2026-08-29
ADOBE ACROBAT PDF 964.8 KB
5N2504_Tune up_FCC IC
Parts List/Tune Up Info
ADOBE ACROBAT PDF 140.8 KB
FA5N2504_FCC_IdeaPad Slim 5 15Q8Y11_QCNCM825A
RF Exposure Info
2026-03-02
ADOBE ACROBAT PDF 1.2 MB
FA5N2504_FCC_IdeaPad Slim 5 15Q8Y11_QCNCM825A_Appendix A
RF Exposure Info
2026-03-02
ADOBE ACROBAT PDF 503.9 KB
FA5N2504_FCC_IdeaPad Slim 5 15Q8Y11_QCNCM825A_Appendix B
RF Exposure Info
2026-03-02
ADOBE ACROBAT PDF 106.6 KB
FA5N2504_FCC_IdeaPad Slim 5 15Q8Y11_QCNCM825A_Appendix C
RF Exposure Info
2026-03-02
ADOBE ACROBAT PDF 580.5 KB
FA5N2504_FCC_IdeaPad Slim 5 15Q8Y11_QCNCM825A_Appendix D
RF Exposure Info
2026-03-02
ADOBE ACROBAT PDF 98.7 KB
FA5N2504_FCC_IdeaPad Slim 5 15Q8Y11_QCNCM825A_Appendix E
RF Exposure Info
2026-03-02
ADOBE ACROBAT PDF 5.5 MB
IdeaPad Slim 5 15Q8Y11 Antenna report template_AWAN
Test Report
2026-03-02
ADOBE ACROBAT PDF 495 KB
IdeaPad Slim 5 15Q8Y11 Antenna report template_Speed
Test Report
2026-03-02
ADOBE ACROBAT PDF 511 KB
FA5N2504_FCC_IdeaPad Slim 5 15Q8Y11_QCNCM825A_Appendix F (photo
Test Setup Photos
2026-08-29
ADOBE ACROBAT PDF 73.7 KB
IdeaPad Slim 5 15Q8Y11 Antenna report template_AWAN_photo
Test Setup Photos
2026-08-29
ADOBE ACROBAT PDF 287.2 KB
IdeaPad Slim 5 15Q8Y11 Antenna report template_Speed_photo
Test Setup Photos
2026-08-29
ADOBE ACROBAT PDF 327.5 KB
ideapad_slim_5x_1315_ug_en_20251014_V2
Users Manual
2026-08-29
ADOBE ACROBAT PDF 4.8 MB
Regulatory Notice
Users Manual
2026-08-29
ADOBE ACROBAT PDF 735.3 KB
Application Information
Application ID Kph8kdtVMDzkIGo5+Bj2Cw== Final Action Date 2026-03-02 Application Purpose Class II Permissive Change Model QCNCM825 Frequency Range 5180-5250 MHz; 5250-5320 MHz; 5500-5720 MHz; 5745-5825 MHz; 5815-5815 MHz; 5835-5835 MHz; 5845-5845 MHz; 5855-5855 MHz; 5865-5885 MHz; 2402-2480 MHz; 2404-2478 MHz; 5935-6415 MHz; 5935-7115 MHz; 6535-6855 MHz; 2412-2472 MHz Equipment Class NII - Unlicensed National Information Infrastructure TX Device Description Qualcomm WiFi 7/BT Combo module Responsible Party Paul Guckian, pguckian@qti.qualcomm.com, 858-651-1547 Non-Technical Contact Paul Guckian, Qualcomm Technologies, Inc., pguckian@qti.qualcomm.com, 858-651-1547 Test Firm Alex Chen, SPORTON International Inc., alex@sporton.com.tw, +886-3-327-0973 TCB Email QA65@sporton-usa.com TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques Long-Term Confidentiality Yes Short-Term Confidentiality Yes Short-Term Release Date 08/29/2026 Modular Equipment Single Modular Approval Composite Device Yes Cognitive Radio No Authorization Waiver No Authorization Waiver Approved No Section 5301 Certification Yes Related OET Knowledge DataBase Inquiry No Applications (18)
Application ID Date Purpose
D2nqEkiDihRGqKdkbykBcQ==
2026-09-11
Class II Permissive Change
3m8TSkaKYbO0Ucw8oDWBJQ==
2026-09-04
Class II Permissive Change
XcGaD+cIpzc0W9RSi5gAow==
2026-05-08
Class II Permissive Change
Kph8kdtVMDzkIGo5+Bj2Cw==
2026-03-02
Class II Permissive Change
jo/MXxjyMAyrMuSmVRfjiw==
2026-02-11
Class II Permissive Change
ULzpa8xqexVWZPgSl/p2qA==
2026-01-29
Class II Permissive Change
B7gZ29TjGODTB2SvNr1+pw==
2026-01-13
Class II Permissive Change
FBCTwzePa7kDrCoe/WpCew==
2025-12-07
Class II Permissive Change
JcZ5uVND8/3ifmgmBEUTgA==
2025-03-26
Original Equipment
P4tjGlSp8F+jKA2LSJarMg==
2024-10-03
Class II Permissive Change
H3DE2qpSMN11zQHBP6tiYg==
2024-08-01
Class II Permissive Change
Gi5ZZFKWO0krG0SzTimhug==
2024-07-30
Class II Permissive Change
n469DluO/2TBEJTpaJmLBQ==
2024-07-16
Class II Permissive Change
nIPiqx9MGBp8X6uQqLQRXA==
2024-06-03
Class II Permissive Change
GzzXMd8RbFdWaYTycz7tOg==
2024-04-24
Class II Permissive Change
w+cgdtqtSzBJtOHIRpwrmg==
2024-04-23
Class II Permissive Change
E1GheByAhujDLdzWDJaJjg==
2024-01-21
Class II Permissive Change
9a2jaS1qJ/KGCpHLAbc1sg==
2023-08-27
Original Equipment
Equipment Authorization
Frequency Output Tolerance Emission Designator Rules
5180–5250 MHz
0.158
15E
5250–5320 MHz
0.145
15E
5500–5720 MHz
0.176
15E
5745–5825 MHz
0.146
15E
5865–5885 MHz
0.426
15E
5845–5845 MHz
0.374
15E
5835–5835 MHz
0.456
15E
5855–5855 MHz
0.525
15E
5815–5815 MHz
0.155
15E
Grants
TCB
GRANT OF EQUIPMENT
AUTHORIZATIONTCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:
Sporton International (USA) Inc.
1175 Montague Expressway
Milpitas, CA 95035
Date of Grant: 03/02/2026
Qualcomm Technologies, Inc.
5775 Morehouse Drive
San Diego, CA 92121
Attention: Paul Guckian , Vice President, Regulatory Engineering
NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
FCC IDENTIFIER:
J9C-QCNCM825
Name of Grantee:
Qualcomm Technologies, Inc.
Equipment Class:
Unlicensed National Information Infrastructure TX
Notes:
Qualcomm WiFi 7/BT Combo module
Modular Type:
Single Modular
Grant Notes
FCC Rule Parts
Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO
15E
5180.0
-
5250.0
0.158
CC MO ND
15E
5250.0
-
5320.0
0.145
CC MO ND
15E
5500.0
-
5720.0
0.176
CC MO
15E
5745.0
-
5825.0
0.146
CC EP MO
15E
5865.0
-
5885.0
0.426
CC EP MO
15E
5845.0
-
5845.0
0.374
CC EP MO
15E
5835.0
-
5835.0
0.456
CC EP MO
15E
5855.0
-
5855.0
0.525
CC EP MO
15E
5815.0
-
5815.0
0.155
Class II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer IdeaPad Slim 5 15Q8Y11. The highest reported SAR for the body and simultaneous transmission use conditions are 0.49 W/kg and 1.34 W/kg, respectively.
CC:
This device is certified pursuant to two different Part 15 rules sections.
EP:
Output power is Effective Isotropic Radiated Power (EIRP)
MO:
This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:
This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).