Qualcomm WiFi 7/BT Combo module — by Qualcomm Technologies, Inc.
FCC.gov blocks direct links from other sites (referer check) — titles below aren't clickable.
Use "View on FCC.gov" above to open and download the actual files.
Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
FCC ID J9C-QCNCM825
Device Details
FCC ID J9C-QCNCM825 Grantee Code J9C Product Code QCNCM825 Applicant Qualcomm Technologies, Inc. Address San Diego, CA, 92121, United States Equipment Class DTS - Digital Transmission System Device Description Qualcomm WiFi 7/BT Combo module Application Purpose Class II Permissive Change Grant Date 2026-02-11 Frequency Range 2402-2480 MHz; 2412-2472 MHz Operating Frequencies
Frequency Range Application Purpose Final Action Date
2412–2472 MHz
Class II Permissive Change
2026-02-11
2402–2480 MHz
Class II Permissive Change
2026-02-11
Exhibits (25)
View on FCC.gov ↗
Document Type Available File
J9C_Attestation_U.S. agent_2.911d7
Attestation Statements
2026-02-11
ADOBE ACROBAT PDF 112.8 KB
J9C-QCNCM825_Attestation_Covered List_2.911d5(i)
Attestation Statements
2026-02-11
ADOBE ACROBAT PDF 142.5 KB
J9C-QCNCM825_Attestation_Covered List_2.911d5(ii)
Attestation Statements
2026-02-11
ADOBE ACROBAT PDF 142.5 KB
J9C-QCNCM825_cvrltr_Class II Permissive Change
Cover Letter(s)
2026-02-11
ADOBE ACROBAT PDF 146.8 KB
J9C-QCNCM825_cvrltr_FCC Confidentiality Request
Cover Letter(s)
2026-02-11
ADOBE ACROBAT PDF 179.2 KB
J9C-QCNCM825_cvrltr_FCC POA
Cover Letter(s)
2026-02-11
ADOBE ACROBAT PDF 136.5 KB
J9C-QCNCM825_FCC LOA
Cover Letter(s)
2026-02-11
ADOBE ACROBAT PDF 90.4 KB
Extpho_r1
External Photos
2026-07-28
ADOBE ACROBAT PDF 2.7 MB
Label Location
ID Label/Location Info
2026-02-11
ADOBE ACROBAT PDF 67 KB
Label Sample
ID Label/Location Info
2026-02-11
ADOBE ACROBAT PDF 50.7 KB
Intpho_r1
Internal Photos
2026-07-28
ADOBE ACROBAT PDF 774.6 KB
FA5O1522-01_R01_FCC SAR_Appendix A
RF Exposure Info
2026-02-11
ADOBE ACROBAT PDF 464.9 KB
FA5O1522-01_R01_FCC SAR_Appendix B
RF Exposure Info
2026-02-11
ADOBE ACROBAT PDF 82.1 KB
FA5O1522-01_R01_FCC SAR_Appendix C
RF Exposure Info
2026-02-11
ADOBE ACROBAT PDF 569.1 KB
FA5O1522-01_R01_FCC SAR_Appendix D
RF Exposure Info
2026-02-11
ADOBE ACROBAT PDF 94.5 KB
FA5O1522-01_R01_FCC SAR_Appendix E
RF Exposure Info
2026-02-11
ADOBE ACROBAT PDF 4.4 MB
FA5O1522-01_R02_FCC SAR
RF Exposure Info
2026-02-11
ADOBE ACROBAT PDF 2.1 MB
Antenna Report_Hightek
Test Report
2026-02-11
ADOBE ACROBAT PDF 1.7 MB
Antenna Report_Pulse
Test Report
2026-02-11
ADOBE ACROBAT PDF 1.5 MB
Antenna Report_Hightek (photo)
Test Setup Photos
2026-07-28
ADOBE ACROBAT PDF 994 KB
Antenna Report_Pulse (photo)
Test Setup Photos
2026-07-28
ADOBE ACROBAT PDF 798.1 KB
FA5O1522-01_R01_FCC SAR (photo)
Test Setup Photos
2026-07-28
ADOBE ACROBAT PDF 123.1 KB
UM
Users Manual
2026-07-28
ADOBE ACROBAT PDF 5.3 MB
UM_RN
Users Manual
2026-07-28
ADOBE ACROBAT PDF 728.3 KB
UM_SG
Users Manual
2026-07-28
ADOBE ACROBAT PDF 539.6 KB
Application Information
Application ID jo/MXxjyMAyrMuSmVRfjiw== Final Action Date 2026-02-11 Application Purpose Class II Permissive Change Model QCNCM825 Frequency Range 2402-2480 MHz; 2412-2472 MHz Equipment Class DTS - Digital Transmission System Device Description Qualcomm WiFi 7/BT Combo module Responsible Party Paul Guckian, pguckian@qti.qualcomm.com, 858-651-1547 Non-Technical Contact Paul Guckian, Qualcomm Technologies, Inc., pguckian@qti.qualcomm.com, 858-651-1547 Test Firm Alex Chen, SPORTON International Inc., alex@sporton.com.tw, +886-3-327-0973 TCB Email QA65@sporton-usa.com TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques Long-Term Confidentiality Yes Short-Term Confidentiality Yes Short-Term Release Date 07/28/2026 Modular Equipment Single Modular Approval Composite Device Yes Cognitive Radio No Authorization Waiver No Authorization Waiver Approved No Section 5301 Certification Yes Related OET Knowledge DataBase Inquiry No Applications (18)
Application ID Date Purpose
D2nqEkiDihRGqKdkbykBcQ==
2026-09-11
Class II Permissive Change
3m8TSkaKYbO0Ucw8oDWBJQ==
2026-09-04
Class II Permissive Change
XcGaD+cIpzc0W9RSi5gAow==
2026-05-08
Class II Permissive Change
Kph8kdtVMDzkIGo5+Bj2Cw==
2026-03-02
Class II Permissive Change
jo/MXxjyMAyrMuSmVRfjiw==
2026-02-11
Class II Permissive Change
ULzpa8xqexVWZPgSl/p2qA==
2026-01-29
Class II Permissive Change
B7gZ29TjGODTB2SvNr1+pw==
2026-01-13
Class II Permissive Change
FBCTwzePa7kDrCoe/WpCew==
2025-12-07
Class II Permissive Change
JcZ5uVND8/3ifmgmBEUTgA==
2025-03-26
Original Equipment
P4tjGlSp8F+jKA2LSJarMg==
2024-10-03
Class II Permissive Change
H3DE2qpSMN11zQHBP6tiYg==
2024-08-01
Class II Permissive Change
Gi5ZZFKWO0krG0SzTimhug==
2024-07-30
Class II Permissive Change
n469DluO/2TBEJTpaJmLBQ==
2024-07-16
Class II Permissive Change
nIPiqx9MGBp8X6uQqLQRXA==
2024-06-03
Class II Permissive Change
GzzXMd8RbFdWaYTycz7tOg==
2024-04-24
Class II Permissive Change
w+cgdtqtSzBJtOHIRpwrmg==
2024-04-23
Class II Permissive Change
E1GheByAhujDLdzWDJaJjg==
2024-01-21
Class II Permissive Change
9a2jaS1qJ/KGCpHLAbc1sg==
2023-08-27
Original Equipment
Equipment Authorization
Frequency Output Tolerance Emission Designator Rules
2412–2472 MHz
0.932
15C
2402–2480 MHz
0.025
15C
Grants
TCB
GRANT OF EQUIPMENT
AUTHORIZATIONTCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:
Sporton International (USA) Inc.
1175 Montague Expressway
Milpitas, CA 95035
Date of Grant: 02/11/2026
Qualcomm Technologies, Inc.
5775 Morehouse Drive
San Diego, CA 92121
Attention: Paul Guckian , Vice President, Regulatory Engineering
NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
FCC IDENTIFIER:
J9C-QCNCM825
Name of Grantee:
Qualcomm Technologies, Inc.
Equipment Class:
Digital Transmission System
Notes:
Qualcomm WiFi 7/BT Combo module
Modular Type:
Single Modular
Grant Notes
FCC Rule Parts
Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO
15C
2412.0
-
2472.0
0.932
CC MO
15C
2402.0
-
2480.0
0.025
Class II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer/ Model: IdeaPad 5 2-in-1 14Q8Y11***************(*=0~9, A~Z, a~z, "-" or blank, for marketing use only, with no impact on RF compliance of the product). The highest reported SAR for the body and simultaneous transmission use conditions are 1.09 W/kg and 1.35 W/kg, respectively.
CC:
This device is certified pursuant to two different Part 15 rules sections.
MO:
This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
Regulatory Testing from Start to Certificate
